The Independent Scratches on the body of your vehicle irritate. Yet they are unavoidable with our narrow roads, bushes, bodaboda, rough car washers, and naughty kids who think your black car is the perfect blackboard.
Unfortunately, there is a misconception that scratches are easy to remove with simple wax or machine buff. T-cut is the common prescription.
It is named after the UK made removing or cutting compound. There are many similar products. But, as many car owners have realised, these are not always the solution to fixing scratches.
In thorough cleaning, restoration, and finishing of a car, T-cut is among the more aggressive measures one can take to restore a vehicle surface look. Yet it only works with the least serious scratches i. To apply T-Cut, it is a very simple process. Cleaning the surface of your car is incredibly easy and can be done by either running the entire car through a car wash, or thoroughly cleaning and drying the car by hand. The next step is to put on a pair of gloves and apply T-Cut to a clean cloth — something without fluffy fibres.
The reason for this is the fibres can break off into the T-Cut solution, and this can also mark the paint. Next comes the application. Working in a circular motion, rub the solution over the scratched area, applying firmly to ensure it gets into the grooves of the damage especially with coloured T-Cut. In many cases, the cloth changes colour as the top layer of paint is removed.
Once the scratch has gone, you need to take another clean cloth and remove the excess product. Again, this can be done with circular motions, and will ensure a buffed up finish.
Not to mention, through buffing any excess T-Cut away, you remove any potential damage from unnecessary drips. This process can be applied to a small area of a car, such as a wheel arch, or it can be applied to much larger surface areas. If the latter is the case, then T-Cut will need to be applied all over, one panel at a time, and will requires several containers of T-Cut to ensure you have enough of the compound.
If, for instance, you want to restore an old paint job all over a car, the process is the same as with a smaller area, but it is a more laborious job. Every panel will need to be treated, one panel at a time, to ensure an even application. The maintenance afterwards will also be more intensive, since the car will regularly need to be waxed all over.
Since the top, protective layer has been removed, the car now needs to be waxed on a regular basis to prevent corrosion. Waxing is a vital step to remember, as the last thing you want to do, when removing damage from a car, leaves it vulnerable to more damage at a later date. Ultimately, using T-Cut will restore shine initially, but the paint will always fade due to it being a paint restoration compound and not paint and the best way to give an old car a new lease of colour life would be a new paint job.
This can prove expensive. As mentioned before, T-Cut is only really suitable for removing shallow, surface scratches from a car due to it working by removing the top layer of paint to restore a scratch. Most of the common incidents which can scratch your car, such as scraping along a low wall, kerb, brushing again another car or through an act vandalism e.
There are other cases where applying T-Cut yourself, or trying to repair the scratches yourself, are not recommended. Where T-Cut is easy to use, there is still certain level of expertise and elbow grease required for applying and using it correctly. Using the wrong cloth, or one which has been dropped on the floor, can inflict more damage. Due to the paint removal nature of the product, applying too much T-Cut can be an error that is expensive to come back from.
It is unfortunately easy to take off too much paint with the application and reveal bare metal below, particularly on car corners. This is not something which can be rectified with wax, and can cost quite a lot of money to repair. Since T-Cut has been used for cleaning and restoring the original colour back to vehicles and has been passed down through generations of families to keep their car's paintwork in perfect condition.
As well as for use on vehicles, T-Cut can also be used around your home in a range of restoration projects on products such as domestic appliances, windows and doors, garden furniture and more. The T-Cut Original Restorer launched back in and has been trusted by motorists for decades. The unique formula of the T-Cut Original restores the paintwork of your car back to it's original colour and lustre in seconds, removing road grime, tar spots and dried insects from your vehicle.
This incredible T-Cut For Cars formula contains no silicones and leaves no harmful residues, preparing an ideal surface for re-painting. Ideal for use on aged paintworks, T-Cut Original Restorer is a must-have for car care enthusiasts.
The T-Cut Rapid Scratch Remover is a unique T-Cut formula, designed to help you safely remove swirls, marks and light scratches from your car's paintwork. Essentially, T-Cut is a good short-term solution, as it will primarily provide your car with a shine, whilst also removing any light scratches or marks. But this is temporary, as the paint will eventually fade, so a longer-term solution would be a new paint job, for a car that has dull and fading paintwork.
If You Are Inexperienced With Repairs : You need some idea of what you are doing, as a simple mistake like using the wrong type of cloth, or using one that had accidentally fallen to the ground, can cause more harm than good. Furthermore, knowing when to stop rubbing the T-Cut on the scratch is essential, as overdoing it after the scratch is removed, could result in you revealing the metal beneath the paint.
Which T-Cut should you use? T-Cut Metallic Colour Restorer — Less abrasive than T-Cut original, so it is more suited for sensitive paint finishes, specifically for metallic surfaces and pearlescent paintwork. T-Cut Colour Fast — Removes minor scratches, scuffs and marks, all whilst adding colour, in one simple application.
T-Cut Polish — Removes surface oxidation, minor scratches and blemishes, whilst providing a shiny finish to your paintwork. It is safe when used correctly, and when precautionary measures are taken. You should always read the label on the bottle, as it will tell you that when using T-Cut, you need to wear appropriate gloves to avoid prolonged skin exposure, as it may result in dry and cracking skin.
Furthermore, only use the product in areas that are ventilated, as vapours can cause lethargy and dizziness.
0コメント